FAQs

How to fill the water tank for the Robot Vacuum

Before You Start

• Fill with cool/room temperature water only. Be careful not to wet the metal contacts.

• Use only cleaning agents specified by Tapo. Others may corrode the water tank.

RV10/RV20 Mop

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV10 Plus/RV20 Mop Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Plus

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

3. Re-install the dustbin and water tank.

RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max

1. Take out the dustbin and water tank.

2. Remove the rubber plug and add water to the water tank.

Note: To prevent corrosion, do NOT add any cleaning agents. Only use cool or room temperature water and be careful not to wet the metal contacts.

3. Wipe the water tank with a clean, dry cloth.

4. Re-install the dustbin and water tank.

TP-LINK