How do I disable the Anti-theft alarm of my Battery-Powered Camera?

Tapo battery-powered outdoor camera features the Anti-Theft Alarm to enhance security. When enabled, the camera will trigger a loud alarm if it is moved significantly. Additionally, the camera cannot be manually turned off or reset while the alarm is active, preventing thieves from silencing it or unbinding the device. Q1: How do I disable the Anti-Theft Alarm? A1: There are two methods for you to disable/deactivate the Anti-theft Alarm. Method 1: Switch the Anti-theft Alarm button in the Tapo app. Launch the Tapo app to tap your camera. -> Tap the gear icon on the top right corner of the live feed page. -> Tap Alarm, then you can find Anti-theft Alarm to disable/enable it. Method 2: Press the power button 10 times within 30 seconds to deactivate the Anti-theft Alarm manually. Q2: How does the Anti-Theft Alarm stop? A2: The alarm will automatically stop after the camera has been still for 15 minutes. However, the alarm will sound again if the camera is moved significantly after that. If you would like the alarm to stop immediately or just want to disable the alarm, please refer to Q1. Q3: What happens when the Anti-theft Alarm is triggered? A3: When the anti-theft alarm is triggered: (1) The camera emits the alarm sound on and off in a repeating cycle for 15 minutes to deter theft. (2) At the same time, it will send you app notifications about the event. (Please ensure notifications are enabled in the Tapo app) (3) Automatically stop the alarm after the camera is still for 15 minutes. (4) Keep recording until the alarm stops or the battery dies. Note: If you enabled the Anti-theft alarm: (1) The camera can’t be powered off until the battery dies. (2) The camera is not allowed to be reset.

How to unlink third-party accounts from your TP-Link ID

If you've previously linked your TP-Link ID to third-party services such as Amazon Alexa or Google Home and wish to remove this integration, follow the steps outlined below. Unlinking your TP-Link ID will revoke access to these services to control your Tapo or Kasa devices. Please note that after unlinking, voice commands and automation associated with these services will no longer function until re-linked. Method 1: Unlinking via Third-Party app Unlink Alexa service 1. Open the “Amazon Alexa” app and select “Skills & Games” in the menu. 2. Select the button “Your Skills”. 3. Search “Tapo” / “Kasa” skill. 4. Select the button “Disable Skill” to disable the skill, which can unlink the Tapo/Kasa account from Alexa. Unlink Google Home service 1. Open the “Google Home” APP and select Settings > Works with Google. 2. Find “Tapo” / “Kasa” on “Linked” service, tap and select Unlink account. 3. Confirm “UNLINK” to unlink Tapo/Kasa account from Google Home. Unlink SmartThings service 1. Open the “SmartThings” APP and select “Menu”. 2. Tap the Settings icon at the upper right. 3. Tap “Linked Services”, tap Tapo/Kasa, and select “Unlink” to unlink Tapo/Kasa account from SmartThings. Method 2: Unlinking via TP-Link If you don’t have access to your third-party account, you can unlink the third-party service by changing the password of your TP-Link account. 1. Set a new password in Tapo/Kasa APP in Me > View Account > Change Password. 2. The Email address used for Tapo/Kasa account will receive an Email to tell you that the password has been changed. 3. Please select “unlink services” to unlink all the third-party accounts with your TP-Link ID.

Why do I receive a "We Noticed a New Login" email?

If you receive a "We Noticed a New Login" email or notification, it could mean a new device has logged in to your TP-Link account. Here are possible reasons: 1. You logged in using a new device with the same TP-Link ID. 2. Your TP-Link ID was shared with others (e.g., family or friends), and they logged in from a different device. To secure your account and address potential unauthorized access, follow these steps: Step 1: Confirm Login Activity and change Your Account Password It is recommended that you should check whether the account was logged in on your trusted devices. If not, please change the login password as soon as possible. Here is guidance for you to change your account password: https://community.tp-link.com/en/forgetpw Note: If you used the same username and password combination for your TP-Link ID on multiple apps or websites, please use a difficult-to-guess, unique password not used on other accounts. Step 2: Enable Two-Factor Authentication (2FA) For Tapo: Open Tapo App > Me > Tap account> Log in security>Two-Factor Authentication. Follow the guide here . For Kasa: Open Kasa App > Me>Tap account> Log in security>Two-Factor Authentication. Follow the guide here . For Deco: Open Deco App > Tap hamburger button on the top left Tap account> Log in security>Two-Factor Authentication. Follow the guide here . For Tether: Open Tether App > Tap hamburger button on the top left Tap account> Log in security>Two-Factor Authentication. Follow the guide here . Step3: Remove untrusted devices under 2FA If you’ve already enabled 2FA, please review your trusted devices list and remove any unknown entries to ensure your account is not accessed from unauthorized devices.

How to create 3D Map in the Tapo App for Pad

Security, lighting, power, switches, and environmental controls—every household device is neatly displayed on a 3D map. With home status instantly visible, intuitive control from a single screen ensures effortless use by everyone in the family. Step1: Download the 3D Floor Plan 1. Open the Home page of your Tapo APP 2. Click on the cube icon (3D vivid view) in the top right corner 3. Download the Plan Step2: Choose the way to generate the map Method1: Draw Manually Method 2: Map by Robot Vacuum (You can choose this method if you have a robot vacuum that supports the mapping function.) Step3: Generate the Map Method1: Draw Manually 1. Follow the instructions in the Tapo App to learn how to create the floor plan of your sweet home. 2. Customize the floor plan (rooms and doors), choose the furniture, and drag the smart home devices that are bonded to your account to the place you want. 3. Save the settings: Click the save button on the top right corner and enjoy the 3D map. Method2: Map by Robot Vacuum 1. Choose a robot vacuum. 2. Choose a Map from the robot vacuum and the floor plan will be generated automatically. 3. Customize the floor plan (rooms and doors), choose the furniture, and drag the smart home devices that are bound to your account to the place you want. 4. Save the settings: Click the save button on the top right corner and enjoy the 3D map. How to add the 2nd or more floors Click on the Floor button and add it. Choose the way to create the new floor. Don’t forget to save the settings.

How to use the Home feature and Room feature in the Tapo App

This feature allows you to customize your smart home experience, making it simple to control different devices based on where they are located. Whether you have multiple properties or just want to keep your living spaces organized, setting up Homes and Rooms helps streamline your smart device management. For Home Feature: 1: Open the Tapo app and tap the “My Home” icon. Select “ Home Settings ” from the menu. 2. Tap the “+” icon to create a new home. 3. Create a name for the home and tap “ Save ”. 4. Add rooms directly or add them later. For Room Feature: 1. Open the Tapo app and tap the “hamburger” icon. Select “ Room Settings ” from the menu. 2. Tap “ Add Rooms ” to create a new room for your devices. 3. Select or enter a name for the room and tap “ Save ”. 4. Choose the devices you want to add to this room and tap “ Add to This Room ” to complete the process. 5. Return to the home page, and you'll see the new room listed in the menu, along with your devices inside it.

How to set privacy zone for your Tapo Camera

The Privacy Zones feature allows you to define a specific area that can't be viewed or monitored to protect your privacy. The purpose of the Private zones is to prevent some areas from being recognized. Note: The settings apply only to the current camera view. When the camera is rotated, the camera view changes and the settings will not apply. Step 1: Launch Tapo App, and pick the camera you would like to edit by selecting it to enter the live view. Step 2: Tap the Device Settings > Video& Display > Privacy Zones . Step3: Enable Privacy Zones , and click on the arrow symbol to edit. Step 4: Add zone and drag the corners of the privacy zones to adjust it. Personalize privacy zones by adding and clearing. Then save the changes. Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Tapo/Kasa Devices are showing offline after changing or resetting the router.

*Note: All Tapo/Kasa devices require and only work with the Tapo/Kasa for Mobile App If you can't get smart devices online to the network after changed the ISP/ router, or the router is reset, you may try the following guides: Currently, there is no setting on Tapo/Kasa APP allowing us to switch to a different wireless network directly, but you can achieve this goal using the following two methods instead: 1. Apply the same wireless settings (including the wireless network name, wireless encryption, and password) on your new router as on the old one. Then the device should be able to connect to the new router automatically. 2. If you can’t change the wireless settings, you can also reset and reconfigure the smart device again with the new Wi-Fi. Please refer to the QIG to reset your smart device. (Both soft reset and hard reset are OK.) For reconfiguration, here are some articles for your reference. For Tapo: For camera: How to set up the Tapo camera | TP-Link For smart bulb: How to set up Tapo smart bulb | TP-Link For smart plug: How to set up Tapo smart plug | TP-Link For hub: How to Set Up Your Tapo Smart Hub and Connect Hub to Your Router Wirelessly (Tapo H200) | TP-Link For Kasa: For camera: How Do I Setup my Kasa Cam? | TP-Link For plug: How to set up my TP-Link Smart Plug Switch via Kasa If you need further assistance, contact TP-Link Customer Support here .

How can I conduct 3DS authentication when purchasing Tapo Care

What is 3DS authentication? 3DS authentication, also known as 3D Secure authentication, is a security protocol designed for online payments. Its primary objective is to enhance the security of online transactions and prevent fraudulent activities. Depending on the policies of your issuing bank or payment provider, you may be required to undergo 3DS authentication. During the 3DS authentication process, you will be prompted to provide supplementary verification details, such as a password, SMS verification code, or fingerprint scan. These details are cross-referenced with your banking information to verify your identity and the legitimacy of the transaction. How can I conduct 3DS authentication when purchasing Tapo Care? 1. Please log in your account on our website: Tapo Care . 2. Click the icon next to the “Renew Failed” and click “Verify Now”. Then, please follow the instructions to complete the authentication process.

How to configure the Notification feature for the Tapo & Kasa devices on the Tapo app

With the Notification feature configured on the Tapo app, you can decide whether to receive notifications on your phone. Here is the detailed instruction to configure the Notification feature on the Tapo app. Part 1. Notification Settings for all smart devices On the Tapo app>> Me >> Notifications page, you are able to change the Notification Settings. 1) You can tap System Notifications to toggle On/Off the Device Sharing , Firmware Update , and New Device Found options to decide whether to receive these notifications on your phone. 2) You can toggle On/Off the Promotions to decide whether to receive exclusive offers, VIP giveaways, and new product notifications. 3) If you enable the Device and go to the Management page, you can turn On/Off the switch beside the smart device to decide whether to receive notifications about it. 4) Tap the Do Not Disturb feature and when it is enabled, you won't receive notifications during the scheduled time on your phone. Tap Exceptions >> Add Devices to add devices if you want to receive notifications from them during Do Not Disturb. Note: Notifications like water leaks or doorbell thefts still work during the scheduled time. If you’d like to change the notification sound for your Tapo App, follow the steps below based on your device type: 1. For Android Phones: Go to Settings > Apps > Manage apps on your phone and search for the Tapo app. Tap on the Tapo app to access its settings, then navigate to the Notifications section. From here, you can enable/disable notifications or customize the notification sound for the Tapo app. Note: The exact path to manage notification sounds may vary slightly depending on your Android device. If you cannot find the settings, contact your phone’s customer support for assistance. 2. For iPhones: Go to Settings > Sounds & Haptics > Default Alerts on your iPhone. Select the desired notification sound from the available options. Note: iOS does not allow apps to use custom notification sounds beyond the default system sounds. You can only choose from the predefined options provided by your device. Part 2. Notification Settings for Tapo & Kasa Cameras If you want to receive push notifications on your phone when the Tapo & Kasa Cameras detect events, please refer to the following steps to set up the Notification feature on the Tapo app. Here we take Tapo C200 as an example. Step 1. On the Tapo app>> Me >> Notifications page, go to Device Notifications >> Management to ensure the switch is enabled for your camera. Turn off the Do Not Disturb feature or add your camera to the Exceptions page. Step 2. On the Home page of the Tapo app, tap your camera model card or tap the Cameras tab >click on Manage on your camera model to go to the Live View page. Step 3. On the Live View page, tap the icon on the top right corner to enter the Device Settings page. Step 4. Click on Notifications on the Device Settings page. Step 5. Enable Activity Notifications and Rich Notifications as per your desire. Tap Activity Type to select the detection types for which you want to receive push notifications. Note: Currently, some Camera models do not have the Activity Type feature, and you will receive all types of notifications when the camera detects events. Set the time to receive the push notifications. If you select Custom Time , you can customize the time period to receive the push notifications as you desire. If you’d like to change the notification sound for your Tapo App, follow the steps below based on your device type: 1. For Android Phones: Go to Settings > Apps > Manage apps on your phone and search for the Tapo app. Tap on the Tapo app to access its settings, then navigate to the Notifications section. From here, you can enable/disable notifications or customize the notification sound for the Tapo app. Note: The exact path to manage notification sounds may vary slightly depending on your Android device. If you cannot find the settings, contact your phone’s customer support for assistance. 2. For iPhones: Go to Settings > Sounds & Haptics > Default Alerts on your iPhone. Select the desired notification sound from the available options. Note: iOS does not allow apps to use custom notification sounds beyond the default system sounds. You can only choose from the predefined options provided by your device. If you have enabled the Notifications feature on the Tapo app but can’t receive push notifications on your phone, please refer to the link below to troubleshoot. Why can’t I receive notifications after turning on Notifications?

How to check and improve the network connection stability of Tapo&Kasa smart devices

Due to a variety of user installation environments and network topologies, your smart devices may have some connection problems under certain conditions, such as a delay in live view, slow loading, unstable network, and other problems. This FAQ will guide you through checking and improving the stability of the connection between your smart devices and your phone on your local network for better performance. Part 1. Check the signal strength of the TP-Link smart device If your device is connected wirelessly to a Wi-Fi network, you can check the received signal strength on the app. Tapo APP -> tap in the left top -> Device Settings -> Device info -> tap Wi-Fi icon to see signal strength (the value of RSSI). Strong: more than -50 dBm Good to Average: among -70 dBm to -50 dBm Poor: less than -70 dBm Part 2. Check the delay between a smart device and a phone on the local network Due to different network topologies and wireless interference, we still need to check the actual delay between the smart device and the phone via the Ping command if there is a connection issue (such as slow loading, unstable issue, etc.). Here we use the APP “Network Analyzer” as an example. Step 1: Install the test app “Network Analyzer” on your phone. For Android: https://play.google.com/store/apps/details?id=net.techet.netanalyzerlite.an For iOS: https://apps.apple.com/app/network-analyzer/id562315041 Step 2: Check the IP address of the smart device you want to test on the Tapo APP. You can find the IP address of the smart device on the device’s Device Settings -> Device Info page. Step 3: Ping the IP address. Open the “Network Analyzer” app, go to Tools -> Ping, and input the IP address of the camera, then tap on “Start”. Step 4: Check the test results. If your test results show that many data packages are lost, it means your network is not stable. If the data package delay is over 100ms, accessing to your device can be relatively slow. Part 3. How to improve the network connection stability Please refer to this FAQ for detailed troubleshooting steps.

Tapo Enhanced AI Solar Security Camera Ultra

| Tapo C465

Overview
Setup & App
Specifications
Support

Tapo Enhanced AI Solar Security Camera Ultra

Tapo C465

4K 8MP UHD Reveals Every Detail: Experience unparalleled clarity. 4K 8MP UHD provides four times the resolution of standard 1080p, ensuring crystal-clear live views to view details that may otherwise go unnoticed.
50 Minutes of Sun for All-Day Security: The integrated solar panel is your never-ending power source. Keep your security discreet and sustainable: the solar charging panel powers your camera all day on just 50 minutes^◇ of sunlight exposure while a magnetic base ensures easy installation and adjustments.
No Sun, No Problem: The built-in rechargeable 7,800mAh battery provides up to 180 days^§ of power on a single charge to ensure continuous operation even on days without sun exposure.
AI-Powered Detection with No Monthly Fees: Experience powerful, local AI-powered detection for people, pets, and vehicles without any subscriptions. Advanced AI algorithms combined with new NPU computing power provide superior recognition and analysis, all while keeping your data secure and off the cloud.
Dual Band Connectivity: Connect to the faster 5 GHz band for smoother, lag-free 4K live views, or choose the 2.4 GHz band for longer distance coverage.^△
Custom Alarms, Focused Alerts, Private Zones: Tailor your security with personalized features: create custom light and sound alarms, define activity detection zones for precise notifications and extended battery life, and establish privacy zones to control what's recorded.
Built for Any Weather: An IP65 weatherproof rating ensures reliable protection against rain, snow, dust, and extreme heat. Operates in temperatures from -40°F to 140°F.
Local & Cloud Storage: Select local on-device storage via microSD card (up to 512GB, sold separately) or opt for cloud storage with Tapo Care.^*

All-in-One Sun-Powered Surveillance

Enhanced AI Solar Security Camera Ultra

Tapo C465

4K UHD with
18× Digital Zoom

All-in-One Solar Power

180-Day Battery Life

7,800mAh
Rechargeable Battery

Starlight Color Night Vision

Built for Any Weather
IP65 Rated

Local & Cloud Storage

Two-Way Audio

Enhanced Local AI:
No Monthly Fees

Person Detection

Pet Detection

Vehicle Detection

Person

Reliable Solar Power, Rain or Shine

50 Minutes of Direct Sunlight^◇

powers Tapo C465 for a full day, offering effortless green security, no battery maintenance, and no need to be installed near a power outlet.
7800mAh Backup Battery

remains reliable for up to 180 days without sun exposure.^§

Your All-in-One Solar Powered Solution

Effortless Setup in Minutes

The all-in-one design eliminates the hassle of extra parts and wiring. Paired with the camera’s magnetic base, Tapo C465 will be up and running in a blink.
Engineered for Peak Performance

Our integrated solar panel and camera are designed to work in perfect harmony, maximizing power efficiency for consistently reliable operation.

Flexible Angle Adjustment

Adjust the integrated solar panel 45 degrees in any direction for optimal sun exposure.
High-Efficiency Solar Cells

The premium solar panel constructed of monocrystalline silicon cells harnesses the sun's energy with more efficiency than traditional panels, keeping your devices charged and ready.

4K Ultimate View, Sharper and Farther

4K UHD delivers sharper and more detailed live footage, perfect for capturing finer details like license plates, lush lawns, and moving pets.

License Plate
Front Doorstep
Moving Pet

Pause

1080p Cameras

Pause

Live

Pause

Live

18×

Digital Zoom
F1.6

Large-Aperture Lens
6

Layer Optical Coating

Powerful Night Vision: From Vivid Color to Clear IR

A powerful starlight sensor captures vibrant images in low-light, while 850nm IR ensures clear vision in pitch-black areas like your backyard or driveway.

Pause

IR Night Vision

135° Field of View

Monitor large areas of your home without needing multiple cameras. See more of your yard or driveway to provide a complete picture of your property.

Built-In AI Powers Smarter Alerts with Zero Fees

Local AI accurately identifies people, pets, and vehicles near instantly, sending you only essential real-time notifications while keeping your sensitive data off the cloud.

now

Person Detection

“Tapo C465” : Person was detected at 11:30, 01/01/2025.

Vehicle

Person

Pet

24/7 Capture
Always On, Always Monitoring

Ditch battery limitations and experience 24/7 continuous capture. With automatic capture intervals, every crucial moment is recorded, ensuring nothing goes unnoticed.^†

08:30 AM

04:21 PM

04:23 PM

10:47 PM

Without Events

Video records at 1 FPS

Event is Detected

Video recording switches to 15 FPS

08:30 AM

Without Events

Video records at 1 FPS

04:21 PM

Event is Detected

Video recording switches to 15 FPS

04:23 PM

Event is Detected

Video recording switches to 15 FPS

10:47 PM

Without Events

Video records at 1 FPS

Dual-Band Connectivity: 5GHz or 2.4GHz Band

Connect to the faster 5 GHz band for smoother, lag-free 4K live views, or choose the 2.4 GHz band for longer distance coverage.^△

Fully Customize Your Security

Tapo control of your privacy by defining customizable privacy zones. This feature allows you to specifically block recording in designated areas within the camera’s view, ensuring sensitive personal spaces remain completely unmonitored and private.

Customizable Privacy Zones
Customizable Activity Zones
Custom Alarms

You are being recorded.

now

Person Detection

“Tapo C465” : Person was detected at 11:30, 01/01/2025.

Local & Cloud Storage

Secure Local Storage

Supports up to 512GB of local storage on a microSD card.*
Tapo Care Cloud Service

Receive notifications with detection snapshots, encrypted protection, data backups, and 30-day video clip history with Tapo Care cloud services.**

Get a 30-day Free Trial
Multi-Camera Management with HomeBase

Tapo H500 and Tapo H200 offer a convenient and centralized solution for viewing recorded video clips from your entire network of Tapo security cameras. Access and review footage from all your devices in one place for streamlined security management. ^⌂

Secure Local Storage

Supports up to 512GB of local storage on a microSD card.*
Tapo Care Cloud Service

Receive notifications with detection snapshots, encrypted protection, data backups, and 30-day video clip history with Tapo Care cloud services.**

Get a 30-day Free Trial >>
Multi-Camera Management with HomeBase

Tapo H500 and Tapo H200 offer a convenient and centralized solution for viewing recorded video clips from your entire network of Tapo security cameras. Access and review footage from all your devices in one place for streamlined security management. ^⌂

Secure Your Camera & Recordings with Built-in Tamper Detection

Tapo C465's anti-tamper cord and built-in alarm keeps your camera secure. If an intruder attempts to swipe your camera, the anti-tamper cord will ensure it remains in place while a loud siren sounds to alert you.

Anti-Tamper Cord

Engineered for Weather Resilience

Delivers reliable surveillance through rain, snow, dust, and scorching heat. Monitor your property with confidence, no matter the weather.

Operates in environments
reaching 122°F (50°C)
IP65 rating withstands
water and dust
Temperature resistance
down to -4°F (-20°C)

Pair with Smart Assistants

Includes seamless integration with Amazon Alexa and Google Assistant. View live streams on your Echo Show or Chromecast.

Alexa, show me the backyard.

Two-Way Audio

Built-in premium microphone and speakers ensure you can hear and be heard with exceptional clarity.

Could you please leave the package at the door? No problem.

◇ 50 minutes of sunlight time is based on standard environmental conditions (1000W/m², 25°C, AM1.5) and specified working scenes (up to 100 events triggered per day). Actual required time of sunlight may vary.

§ 180-day battery life is based on TP-Link laboratory tests with 300s of use per day. Increased usage of 360s per day reduces battery life to 180 days. Actual battery life may vary due to device settings, router specifications, usage, and environmental factors.

△ 5GHz band has more bandwidth but has decreased Wi-Fi range compared to 2.4GHz band. Ensure that your router is in range to use the 5GHz connection.

*microSD card purchased separately. Actual storage capacity depends on the size of the microSD card used.

**Subscribe for cloud storage and other premium features at https://www.tapo.com/tapocare/

^#The suitable operating temperature for the Solar Panel is -4°F to 113°F. The battery charging temperature should be maintained between 32°F and 113°F.

⌂ Tapo H500 and Tapo H200 are not included. 16TB storage capacity is based on the maximum size of the HDD/SSD drive that can be used. HDD/SSD drive purchased separately. Actual storage capacity will vary depending on the size and type (HDD or SSD) of the drive selected.

Tapo App Support

Easy Setup at Your Fingers

1 Download the free app
2 Plug in and connect
3 Control from anywhere

* Compatible with iOS 9.0 or higher and Android 4.3 or higher

Walk You Through Setup Step by Step

1

Download and open Tapo App
2

Tap Plus (+) to add your smart device
3

Look for your device and connect
4

Name the device and choose the room it’s in
5

Congratulations! You’ve now completed the configuration

Specifications

CAMERA

Image Sensor:

1/2.7” Progressive Scan CMOS Starlight Sensor

Lens:

Focal Length:3.17mm
Aperture: F1.65
Field of View: 134° (Diagonal), 113°(Horizontal), 59°(Vertical)

Motion Range:

Night Vision:

IR-Mode/ Full-Color Mode

Lighting:

2× Built-in Spotlights
Motion Activated, App-Controlled

Hub Compatibility:

Compatible with H500

Interface & Button:

1* Power Button
1* Reset Button
1* MicroSD Card Slot

HUB

Device Compatibility:

Connection Capacity:

Interface & Button:

SOLAR PANEL

Connection Capacity:

Built-in Solar Panel, cannot connect to other cameras

Output Port:

N/A

VIDEO & AUDIO

Maximum Resolution:

4K 8MP (3840 × 2160 px)

Frame Rate:

15fps

Digital Zoom:

18x

Video Compression:

H.265/H.264

Live View:

Yes

Image Enhancement:

3DNR
WDR

Audio Input & Output:

Built-in Microphone and Speaker

Audio Communication:

Two-Way Audio with Noise Cancellation

Siren Volume:

100 dBA (Level measured at 4-inch distance)
80 dBA (Level measured at 40-inch distance)

STORAGE

Local Storage:

MicroSD Card Slot on Camera (Up to 512 GB)

Cloud Storage:

Tapo Care Cloud Storage Services (Subscription required)

DETECTION and NOTIFICATIONS

Sensor:

Single Motion Sensor (FOV: 120° horizontal)
Single Ambient Light Sensor

AI Detection:

Motion Detection
Person Detection
Pet Detection
Vehicle Detection

Activity Zones:

Yes

Output Notification :

System Notification
System Notification with Snapshot (Tapo Care Services)

NETWORK

Network Connectivity:

Connect via Wi-Fi

Wireless Connectivity:

IEEE 802.11b/g/n, 2.4 GHz Wi-Fi
IEEE 802.11a/n, 5 GHz Wi-Fi

Ethernet Port:

RTSP:

ONVIF:

SECURITY

128-bit AES Encryption with SSL/TLS
WPA/WPA2-PSK

POWER

Power Source:

7,800mAh Built-in Rechargeable Lithium-ion Battery
Integrated Solar Panel

Input Voltage:

Adapter Input: 100-240 V, 50/60 Hz (Not include)

Output Voltage:

Adapter Output: 5.0 V, 2.0 A (Not include)

GENERAL

Smart Integration:

Google Assistant, Amazon Alexa

Weather Resistance:

IP65

System Requirements :

Tapo App: iOS 9.0 or higher, Android 4.4 or higher

Mounting Options:

Wall-Mounted

Operating Temperature:

-4°F - 113°F (-20°C - 45°C)

Storage Temperature:

-40°F - 140°F (-40℃ - 60℃)

Operating Humidity:

10%~90% RH, Non-condensing

Storage Humidity:

0~90% RH, Non-condensing

Charging Temperature:

32°F - 122°F (0°C - 50°C)

Package Content:

Tapo C465 Camera × 1
Magnetic Base × 1
Metal Plate × 1
Mounting Template × 1
Screws and Anchors × 3
Anti-Theft Cord × 1
USB Charging Cable × 1
Quick Start Guide

Dimensions( W X D X H ):

Camera Dimensions: 4.29 × 3.31 × 4.72 in (109 × 84 × 120 mm)

Certifications:

CE, FCC, DOE, CEC, RCM, KC, NCC, BSMI, NTRA, IP65

Downloads

GPL Code

Tapo C465_V1_GPL

App

Tapo App

* Compatible with iOS 9.0 or higher and Android 4.3 or higher

FAQ

How do I disable the Anti-theft alarm of my Battery-Powered Camera?
How to unlink third-party accounts from your TP-Link ID
Why do I receive a "We Noticed a New Login" email?
How to create 3D Map in the Tapo App for Pad
How to use the Home feature and Room feature in the Tapo App
How to set privacy zone for your Tapo Camera
Tapo/Kasa Devices are showing offline after changing or resetting the router.
How can I conduct 3DS authentication when purchasing Tapo Care
How to configure the Notification feature for the Tapo & Kasa devices on the Tapo app
How to check and improve the network connection stability of Tapo&Kasa smart devices