FAQs

How to clean the filter of my Robot Vacuum

For RV10 Lite/RV20/RV20 Plus/RV30C

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30 Plus/RV10 Plus/RV20 Mop Plus

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30/RV10/RV20 Mop

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30 Max Plus/RV30 Max/RV20 Max Plus/RV20 Max

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then reinstall the filter as it was originally positioned.

TP-LINK