How Can I Put Tapo Smart Switch in Pairing Mode?
Gli aggiornamenti recenti potrebbero aver esteso l'accesso alle funzionalità discusse in questa FAQ. Visita la pagina di supporto del prodotto, seleziona la versione hardware corretta del dispositivo e controllae la scheda tecnica o la sezione firmware per gli ultimi miglioramenti aggiunti al prodotto. Nota che la disponibilità del prodotto varia a seconda della regione e alcuni modelli potrebbero non essere disponibili nella tua regione.
1. Slide the lock to the OPEN position, then hold both sides of the faceplate and pull it away from the back.
.
2. Install 2 AAA batteries into the battery compartment if you use it for the first time.
3. Press and hold the SYNC/RESET button for about 5 seconds until the LED starts blinking red quickly.
4. Open the Tapo app, tap + on the upper right corner, and follow app instructions to complete pairing; or press the SYNC button on your Tapo hub to start pairing. After pairing is complete, you can find your device on the home page of the Tapo app.
To get to know more details of each function and configuration please go to Download Center to download the manual of your product.