Schedule, Timer or Away Mode Not Working on Tapo and Kasa Smart Devices
Neuere Updates können den Zugang zu Funktionen, die in dieser FAQ erläutert werden, erweitert haben. Besuchen Sie die Support-Seite Ihres Produkts, wählen Sie die richtige Hardware-Version für Ihr Gerät aus und schauen Sie entweder im Datenblatt oder im Firmware-Bereich nach den neuesten Verbesserungen für Ihr Produkt.
This page covers troubleshooting steps for Tapo and Kasa smart devices where the schedule, timer, or away mode is not working — specifically when it cannot be edited in the app, does not take effect, or triggers at the wrong time. If the schedule, time, or away mode is not working as expected, the fixes below cover the most common causes: updating the app and firmware, re-syncing device time, and updating router DNS settings.
Key Takeaways
- If schedule, timer, or away mode is not working, first ensure the Kasa or Tapo app and device firmware are up to date.
- For Kasa devices, re-syncing device time can be done in the Kasa app under Me > Settings > Location and Time.
- For Tapo devices, confirm the correct time zone is set on the mobile device, then factory reset the smart device and re-add it to the Tapo app.
- Changing the router's DNS server to 8.8.8.8 or 8.8.4.4 and rebooting the router may resolve the issue.
Troubleshooting Steps for Schedule, Timer or Away Mode Not Working
Step 1. Update the App and Device Firmware
Ensure you are using the latest App and the Smart device has the latest firmware.
Step 2. Re-Sync the Device Time
For Kasa devices: Launch the Kasa App > Me > Settings > Location and Time. Confirm the Time Zone and Re-synchronize the Kasa device’s time by tapping Location > Sync Location.
For Tapo devices: Please ensure the location and time zone of your mobile phone/tablet are correct. Factory reset the smart device following the instructions in the quick installation guide and add it to the Tapo App again.
Step 3. Change the Router DNS Server
Try changing your router's DNS server to 8.8.8.8 or 8.8.4.4, then save the settings.
Step 4. Reboot your Router
Step 5: Contact TP-Link Support
If the suggestions above fail, please contact TP-Link support with the following information.
- Screenshots of the Schedule/Timer/Away Mode settings, or the error message.
- Your TP-Link ID (email account used in the Tapo/Kasa App).
- Model and MAC address of your smart device.
To learn more about each function and configuration, please visit the Download Center to download the manual for your product.