How to set detection zone for your Tapo Camera

TC40GW, TC41, TC43, TC53, TC55, TC72P2, TC74, TC82, TC82 KIT, TCB82, TCW61, TD25, Tapo C100, Tapo C101, Tapo C103, Tapo C104, Tapo C110, Tapo C110P2, Tapo C111, Tapo C113, Tapo C120, Tapo C125, Tapo C200, Tapo C200P2, Tapo C201, Tapo C202, Tapo C206, Tapo C207, Tapo C210, Tapo C210P2, Tapo C212, Tapo C216, Tapo C21A, Tapo C220, Tapo C222, Tapo C225, Tapo C230, Tapo C236, Tapo C310, Tapo C310P2, Tapo C320WS, Tapo C325WB, Tapo C400, Tapo C400S2, Tapo C402, Tapo C402 KIT, Tapo C403, Tapo C410, Tapo C410 KIT, Tapo C411 KIT, Tapo C420, Tapo C420S1, Tapo C420S2, Tapo C420S4, Tapo C425, Tapo C425 KIT, Tapo C460 KIT, Tapo C500, Tapo C501GW, Tapo C510W, Tapo C51A, Tapo C520WS, Tapo C52A, Tapo C530WS, Tapo C560WS, Tapo C720, Tapo C840, Tapo D205, Tapo D235

01-10-2024 61,233

Последните актуализации може да са разширили достъпа до функциите, обсъдени в Често Задавани Въпроси. Посетете страницата за поддръжка на вашия продукт, изберете правилната версия на хардуера за вашето устройство и проверете информационния лист или секцията за фърмуер за най-новите подобрения, добавени към вашия продукт. Моля, обърнете внимание, че наличността на продукта варира в зависимост от региона и някои модели може да не са налични във вашия регион.

Note：

Different models have different support times and versions. Please pay attention to the official website for firmware updates.

The Detection Zone feature allows you to define a specific area that you want your Tapo Cam to detect. If you only need to monitor activities in a certain area, you can set custom detection zones to reduce unnecessary detections.

There are two types of detection zones:

Set for All: Monitor the same detection area for all detection types.

Set for Each: Monitor different detection areas for each detection type

Please follow the below steps to customize the detection zone for your Tapo Camera.

Case 1: Set for All

Step 1: Launch Tapo App, and pick the camera you would like to edit by selecting it to enter the live stream.

Step 2: Tap the Device Settings> Detection> Detection Zones.

Tap detection. Tap detection zone.

Step3: Select Set for All and tap on Edit button to set the detection zones to only capture what happens in the set zones.

Select set for all.

Step 4: Tap and drag the corners of the detection zones to change its shape. Personalize detection zones by adding, deleting, and clearing zones. Then save the changes.

Set detection zone.

Case 2: Set for Each

Step 1: Launch Tapo App, and pick the camera you would like to edit by selecting it to enter the live stream.

Step 2: Tap the Device Settings> Detection> Detection Zones.

Tap detection on device settings page. Set detection zones on detection page.

Step3: Select Set for Each and tap on Edit button to set the detection zones to only capture what happens in the set zones.

Select set for each.

Step 4: Select different detection types, tap and drag the corners of the detection zones to change its shape. Personalize detection zones by adding, deleting, and clearing zones. Then save the changes.

Select different detection types.