How to Fill a Tapo Robot Vacuum’s Water Tank

Tapo RV10, Tapo RV10 Plus, Tapo RV20 Max, Tapo RV20 Max Plus, Tapo RV20 Mop, Tapo RV20 Mop Plus, Tapo RV20 Plus, Tapo RV30, Tapo RV30 Max, Tapo RV30 Max Plus, Tapo RV30 Plus, Tapo RV30C Mop, Tapo RVA102, Tapo RVA103

01-16-2023 40,204

Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.

Things to know:

Use cool or room temperature water only.
Ensure the metal contacts remain dry.
Only use Tapo recommended cleaning solution. Using other solutions may corrode or damage the water tank.

RV10/RV10 Plus/RV20 Mop/RV20 Mop Plus

1. Remove the Dust bin and water tank from the Vacuum.

2. Remove the rubber plug and add water up to the tank’s fill line.

3. Re-install the dustbin and water tank.

For RV30/RV30 Plus

1. Remove the Dust bin and water tank from the Vacuum.

2. Remove the rubber plug and add water up to the tank’s fill line.

3. Re-install the dustbin and water tank.