How to use Tapo baby camera with Tapo sensor

Tapo C840

01-06-2026 107

Door recente updates is de toegang tot genoemde functie(s) in deze FAQ mogelijk uitgebreid. Ga naar de ondersteuningspagina van uw product, selecteer de juiste hardwareversie voor uw apparaat en controleer de sectie Gegevensblad of Firmware voor de laatste verbeteringen die aan uw product zijn toegevoegd. Let op: De productbeschikbaarheid verschilt per regio en sommige modellen zijn mogelijk niet beschikbaar in uw regio.

Introduction

You can bind your baby camera with a Tapo temperature & humidity sensor to display temperature and humidity tags on the camera screen for easy viewing at any time. This article provides step-by-step instructions for binding the camera and sensor.

Requirements

Make sure you have set up your baby camera successfully. If you haven’t, set up your Tapo camera first.
Make sure you have set up your temperature & humidity sensor successfully. If you haven’t, follow the video guidance to set it up first.

For T310:

For T315:

Configuration

Step 1. In the app, tap the device card and then the gear icon to enter the settings page.

The location “device card” in the app. The location “gear icon” in the app.

Step 2. Tap Temperature & Humidity, then tap Bind with Sensor.

The location “Temperature & Humidity” on the settings page. The location “Bind with Sensor” on the Temperature & Humidity page.

Step 3. Select the sensor you want to bind to the camera, then tap Bind to continue.

The location “sensor list” and “Bind” in the app.

Step 4. After binding to the sensor, the current temperature and humidity will be displayed on the camera screen.

The location “temperature and sensor tags” on the camera’s screen.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.