How to configure Baby-related Detection for Tapo baby camera

Tapo C840

01-06-2026 119

Door recente updates is de toegang tot genoemde functie(s) in deze FAQ mogelijk uitgebreid. Ga naar de ondersteuningspagina van uw product, selecteer de juiste hardwareversie voor uw apparaat en controleer de sectie Gegevensblad of Firmware voor de laatste verbeteringen die aan uw product zijn toegevoegd. Let op: De productbeschikbaarheid verschilt per regio en sommige modellen zijn mogelijk niet beschikbaar in uw regio.

Introduction

The Baby-related Detection feature of Tapo C840 includes Baby Crying, Sleep Detection, Covered Face, Safety Fence, Visitor Detection, and Baby Leave. This article introduces each detection and provides step-by-step instructions for configuration.

Requirement

Make sure you have set up your baby camera successfully. If you haven’t, set up your Tapo camera first.

Configuration

Step 1. In the app, tap the device card and then the gear icon to enter the settings page.

The location “device card” in the app. The location “gear icon” in the app.

Step 2. Tap Detection to enter the page for Baby-Related Detection.

The location “Detection” on the settings page. The location “Baby-related Detection” on the detection page.

Step 3. Tap one detection type, and enter the detection settings page.

Baby Crying: Detects the sound of a crying baby around the camera. Tap Baby Crying, then enable or disable detection and adjust the sensitivity.

The location “Baby Crying” on the detection page. The locations where you can enable/disable “Baby Cry Detection” and adjust “Sensitivity”.

Sleep Detection: Detects your baby’s sleep status in the crib scenario. Tap Sleep Detection, then enable or disable detection and adjust the sensitivity.

The location “Sleep Detection” on the detection page. The locations where you can enable/disable “Sleep Detection” and adjust “Sensitivity”.

Covered Face: Detects if your baby’s head or face is covered or not due to rolling over or obstruction in the crib scenario. Tap Covered Face, then enable or disable detection and adjust the sensitivity.

The location “Covered Face” on the detection page. The locations where you can enable/disable “Covered Face” and adjust “Sensitivity”.

Safety Fence: Detects if your baby leaves the electronic fence you’ve drawn. Tap Safety Fence, then enable or disable detection, and go to Fence Settings to set a zone. You can adjust the zone by dragging the corner points.

The location “Safety Fence” on the detection page. The location where you can enable/disable “Safety Fence” and the location “Fence Settings”. The locations where you can adjust the zone and “Save” on the fence settings page.

Visitor Detection: Detects if someone visits your baby. Tap Visitor Detection, then enable or disable detection and adjust the sensitivity.

The location “Visitor Detection” on the detection page. The locations where you can enable/disable “Visitor Detection” and adjust “Sensitivity”.

Baby Leave: Detects if the baby is in the camera’s field of view. Tap Baby Leave, then enable or disable detection.

The location “Baby Leave” on the detection page. The location where you can enable/disable “Baby Leave”.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.