What to do if my floodlight camera cannot power on

TC53, TC55, Tapo C720

10-13-2022 20,945

Door recente updates is de toegang tot genoemde functie(s) in deze FAQ mogelijk uitgebreid. Ga naar de ondersteuningspagina van uw product, selecteer de juiste hardwareversie voor uw apparaat en controleer de sectie Gegevensblad of Firmware voor de laatste verbeteringen die aan uw product zijn toegevoegd. Let op: De productbeschikbaarheid verschilt per regio en sommige modellen zijn mogelijk niet beschikbaar in uw regio.

Please consult or have it performed by a licensed electrician.

Make sure you have turned on the circuit breaker.
Check that the bracket and camera are firmly attached.

Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.

Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.

Reset the circuit breaker and verify wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult or have it performed by a licensed electrician.