Question 1

Как определить версию встроенного ПО устройства TP-Link?

Accepted Answer

1. Откройте ваш веб-браузер и введите 192.168.1.1 в адресной строке, затем нажмите Enter . Для большинства устройств TP - LINK , IP -адрес страницы настроек по умолчанию - 192.168.1.1. Для коммутаторов - 192.168.0.1 , для точек доступа - 192.168.1.254.

2. Введите имя пользователя и пароль для вашего модема. По умолчанию имя пользователя – admin и пароль – admin , если вы их изменяли, тогда введите новые значения имени пользователя и пароля. Для коммутаторов имя пользователя и пароль по умолчанию - supervisor.

3. На домашней странице веб-утилиты вы сможете найти информацию о версии встроенного ПО.

Маршрутизатор

Пример 1

Пример 2

ADSL

Пример 1

Пример 2

Коммутатор

Пример

Question 2

How to replace the side brush of my Robot Vacuum

Accepted Answer

For RV20/RV20 Plus/RV20 Mop/RV20 Mop Plus

Replace the main brush every 3-6 months.

How to replace

1. Pull firmly to remove the side brushes

2. Identify the colors on the side brushes and the slots of the robot vacuum (black-black; white-white.)

3. Install the new side brushes according to the colors and press them tightly to ensure they are installed in place.

For RV10 Lite/RV30C

Replace the main brush every 3-6 months.

How to replace

1. Pull firmly to remove the side brush.

2. Install the new side brush and press it tightly to ensure it is installed in place.

For RV30 Plus/RV30/RV10 Plus/RV10

Replace the main brush every 3-6 months.

How to replace

1. Pull firmly to remove the side brush.

2. Install the new side brush and press it tightly to ensure it is installed in place.

Question 3

How to replace the main brush of my Robot Vacuum

Accepted Answer

For RV20/RV20 Plus/RV20 Mop/RV20 Mop Plus

Replace the main brush every 6-12 months.

How to replace

1. Turn the robot vacuum over, then unlatch and remove the main brush cover.

2. Remove the main brush and install a new one.

3. Press on the main brush cover to lock it in place.

For RV10 Lite/RV30C

Replace the main brush every 6-12 months.

How to replace

1. Turn the robot vacuum over, then unlatch and remove the main brush cover.

2. Remove the main brush and install a new one.

3. Press on the main brush cover to lock it in place.

For RV30/RV30 Plus/RV10 Plus/RV10

Replace the main brush every 6-12 months.

How to replace

1. Turn the robot vacuum over, then unlatch and remove the main brush cover.

2. Remove the main brush and install a new one.

3. Press on the main brush cover to lock it in place.

Question 4

How to replace the filter of my Robot Vacuum

Accepted Answer

For RV20 Plus

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

For RV10 Lite/RV20/RV30C

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

For RV10 Plus/RV20 Mop Plus

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin and water tank.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

For RV10/RV20 Mop

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin and water tank.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

For RV30 Plus

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin and water tank.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

For RV30

Replace the filter every 3-6 months.

How to replace

1. Remove the dustbin and water tank.

2. Remove the dustbin and open the lid.

3. Remove the filter and install a new one.

Question 5

How to clean the side brush of my Robot Vacuum

Accepted Answer

For RV20/RV20 Plus/RV20 Mop/RV20 Mop Plus

Clean once a month and replace every 3-6 months.

1. Pull firmly to remove the side brushes and remove any entangled debris. Wipe with a damp cloth if needed.

2. Identify the colors on the side brushes and the slots of the robot vacuum (black-black; white-white.)

3. Re-install the new side brushes according to the colors and press them tightly to ensure they are installed in place.

For RV10 Lite/RV30C

Clean once a month and replace every 3-6 months.

1. Pull firmly to remove the side brush and remove any entangled debris. Wipe with a damp cloth if needed.

2. Re-install the side brush and press it tightly to ensure it is installed in place.

For RV30 Plus/RV30/RV10 Plus/RV10

Clean once a month and replace every 3-6 months.

1. Pull firmly to remove the side brush and remove any entangled debris. Wipe with a damp cloth if needed.

2. Re-install the side brush and press it tightly to ensure it is installed in place.

Question 6

How to clean the sensors of my Robot Vacuum

Accepted Answer

For RV20/RV20 Plus/RV20 Mop/RV20 Mop Plus

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV10 Lite

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV10 Plus

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV10

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV30 Plus

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV30

Wipe the sensors with a clean, dry cloth. Clean once a month.

For RV30C

Wipe the sensors with a clean, dry cloth. Clean once a month.

Question 7

How to clean the filter of my Robot Vacuum

Accepted Answer

For RV10 Lite/RV20/RV20 Plus/RV30C

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30 Plus/RV10 Plus/RV20 Mop Plus

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

For RV30/RV10/RV20 Mop

Clean the filter once a week and replace it every 3-6 months. If there is too much dust in the filter, the cleaning efficiency and effect will be reduced.

1. Remove the dustbin and open the lid.

2. Remove the filter.

3. Clean the filter with a cleaning brush.

4. Wash the dustbin and filter.

Note: Do not wash with hot water or detergents.

5. Air-dry the dustbin and filter thoroughly, then install the filter in the previous orientation.

Question 8

How to clean the dustbin of my Robot Vacuum

Accepted Answer

For RV20 Plus

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin.

2. Open the dustbin door to empty the dustbin.

3. Place the dustbin back inside the robot vacuum.

For RV10 Lite/RV20/RV30C

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin.

2. Open the dustbin door to empty the dustbin.

3. Place the dustbin back inside the robot vacuum.

For RV10 Plus/RV20 Mop Plus

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin and water tank.

2. Open the dustbin door to empty the dustbin.

3. Place the dustbin back inside the robot vacuum.

For RV10/RV20 Mop

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin and water tank.

2. Open the dustbin door to empty the dustbin.

3. Place the dustbin back inside the robot vacuum.

For RV30 Plus

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin and water tank.

2. Open the dustbin door to empty the dustbin.

3. Place the dustbin back inside the robot vacuum.

For RV30

Clean the dustbin each time the cleaning is complete. Too much dust in the dustbin will reduce the cleaning efficiency. When the dustbin is too full, the dust may fall on the floor while the robot vacuum is cleaning.

1. Remove the dustbin and water tank.

2. Open the dustbin door to empty the dustbin.

Question 9

Инструкция по очистке зарядных контактов робота&#8209;пылесоса

Accepted Answer

Протирайте зарядные контакты сухой чистой тканью раз в месяц. Схема расположения контактов:

RV10 Lite

RV10 Plus

RV10

RV30 Plus

RV30

Question 10

How to clean the caster wheel of my Robot Vacuum

Accepted Answer

For RV20/RV20 Plus/RV20 Mop/RV20 Mop Plus

Clean the caster wheel once a month.

1. Pull firmly to remove the caster wheel and remove hair or dirt.

2. Re-install the caster wheel and press it firmly in place.

For RV10 Lite/RV30C

Clean the caster wheel once a month.

1. Pull firmly to remove the caster wheel and remove hair or dirt.

2. Re-install the caster wheel and press it firmly in place.

For RV30 Plus/RV30/RV10 Plus/RV10

Clean the caster wheel once a month.

1. Pull firmly to remove the caster wheel and remove hair or dirt.

2. Re-install the caster wheel and press it firmly in place.

Ограничительная магнитная лента для роботов‑пылесосов Tapo

Ограничительная магнитная лента для роботов‑пылесосов Tapo

Приложение Tapo

Пошаговая настройка

Загрузки

FAQ