FAQs

How to control Tapo / Kasa smart devices by Google Home with voice commands

This guide will show you how to connect your Tapo/Kasa device to your Google Home. Once connected, you can use simple voice commands to control Tapo smart plug and smart bulb, or stream your Tapo camera videos on your Google Nest display.

Step 1: Link your Tapo/Kasa smart device with Amazon Alexa referring to: How to make my Tapo/Kasa device (smart plug, smart camera, smart lighting) work with Google Home

Step 2: Control your Tapo/Kasa smart devices based on the below voice commands.

Example:

“Hey Google Show My Front Door Camera” (It will play the camera on the Chromecast-enabled device)

“Hey Google Show My Front Door Camera on my Chromecast”

Currently, the Tapo/Kasa cameras don’t support “camera on/off” command due to possible security risks. For example, an intruder could potentially shut off your cameras with a simple command.

*Note: “Camera Name” is user-defined in the Tapo App.

Device type

Function type

Voice command

Tapo/Kasa camera

Chromecast

Google, show me <camera name> on Chromecast /nest hub
Google, stop <camera name> on Chromecast /nest hub

live feed

Google, show/stop <camera name> live feed

Tapo/Kasa plug

power

Google, turn on/off <device name>

Tapo/Kasa switch

brightness

Google, what's the brightness level of <device name>
Google, set <device name> to XX%
Google, brighten the <device name>
Google, dim the <device name>
Google, adjust <device name> to XX% brightness

power

Google, turn on/off <device name>

Tapo/Kasa blub

color

Google, set <device name> to <color>
Google, set <device name> to cool/warm white
Google, set <device name> to XX Kelvin

brightness

Google, what's the brightness level of <device name>
Google, set <device name> to XX%
Google, brighten the <device name>
Google, dim the <device name>
Google, adjust <device name> to to XX% brightness

power

Google, turn on/off <device name>

Tapo/Kasa light strip

color

Google, wake/sleep/color loop/pulse <device name>
Google, pulse <device name> <color>
Google, stop wake/sleep/color loop <device name>.

Tapo sensor

temperature

Google, What is the temperature of <sensor name>?

Tapo robot vacum

power

Google, turn on/off <device name>
Google, pause <device name>

suction


Google, set <device name>suction to close/quiet/normal/large/largest

water level


Google, set <device name>cistern to close/ least/normal/wet

Kasa thermostat

power


Google, set <device name> to on/off

temperature

Google, set <device name> to heat
Google, set <device name> to XX degree Celsius

Tapo/Kasa shortcut

shortcut

Google, turn on/activate <shortcut name>

The length of time you can stream the live feed through Google Assistant

Watching the live feed of Tapo/Kasa cameras through Google Assistant will use your internet traffic as it’s a Cloud-to-Cloud service. In consideration of your extranet traffic and performance, the live feed will stop automatically after 10 minutes. You can ask Google to show the camera again if you want to continue streaming.

If you need further assistance contact TP-Link Customer Support here.

TP-LINK